Detailed Product Description
High Thermal Efficiency Steam Plate Heat Exchanger Mild Steel Epoxy Painted Frame Plate
Working principle
Channels are formed between the plates and the corner ports are arranged so that the two media fl ow through alternate
channels. The heat is transferred through the plate between the channels, and complete counter-current flow is reated for
highest possible efficiency. The corrugation of the plates provides the passage between the plates, supports each plate
against the adjacent one and enhances the turbulence, resulting in efficient heat transfer.
STANDARD MATERIALS
Frame plate: Mild steel Epoxy painted
Nozzles: Carbon steel
Metal lined: Stainless steel, Titanium
Plates: Stainless steel Alloy 316 or Titanium
A great advance on conventional PHEs
Optimized plate design
The BS Series solves two main problems that occur when conventional plate heat exchangers (PHEs) are used as steam
heaters. The first is that when water is heated over a relatively wide temperature difference, e.g. from 10 to 70°C (50 to 158°F),
the high steam velocity causes erosion and noise problems. The second is that when high water flow rates are used when
heating water only a few degrees, the PHE has to be oversized to keep the secondary side (water) pressure drop within
reasonable limits. Both of these drawbacks are now eliminated in the new BS Series of PHEs by a unique plate geometry that
allows problem-free heating over narrow and wide temperature ranges.
Way ahead of shell-and-tubes
No thermal fatigue Cyclic heating and cooling produces thermal fatigue in rigid steam heaters like straight shell-and-tubes.
This often results in cracked and worn components that demand maintenance and repair, thereby causing unwanted system
downtime. The combination of thin plates and flexible gaskets in the BS Series prevents thermal fatigue by allowing the units
to expand and contract in response to temperature changes. Fine temperature control Rapid heat transfer resulting from the
small hold-up volume and high surface/volume ratio of the plates enables a fast response to temperature control.
Manufacturing
Chemical processing
HVAC
Marine
Food and drink
Pharmaceutical
Short delivery time.
High quality
Reasonable price
Customer made
Know-how design and customer support
|
Model
|
BS200M
|
|
Cross Reference ALFA LAVAL
|
TS20M
|
|
Height, H [mm]
|
1405
|
|
Width, W [mm]
|
740
|
|
Min standard length, L [mm]
|
900
|
|
Max standard length, L [mm]
|
2700
|
|
Vertical port distance, VC [mm]
|
698
|
|
Horizontal port distance, HC [mm]
|
363
|
|
Max temperature
|
180
|
|
Max pressure [barg]
|
10/16
|
|
Flange size
|
DN200/8”
|
|
Max. flow rate [kg/s]
|
190
|
